For Fountain Solution Circuits
|
|
|
|
SICCO-FOUNT 3700 (Fountain Solution Drier)
|
Use:
| - | to be used when drying conditions for the ink are poor
| | - | for printing of packings and matt coated papers and cartons
| | - | SICCO-FOUNT 3700 is added to the mixed dampening water at a low dosage (between 1% and maximal 3%)
|
Advantages:
| - | quicker and better drying of the ink
| | - | better rub resistance
| | - | higher gloss
| | - | quicker print finishing
| | - | no contact yellowing or ghost images
| | - | can also be used without any problems even when low odour inks are used for packaging printing |
|
Cartons with 12 bottles of 1 kg
Cans of 10 kg
|
|
Alco-Stop E 772
|
Alco-Stop E 772 serves for complete replacement of isopropanol in offset presses.
|
Cans of 10 l and 25 l
Drums of 210 l
|
|
Defoamer for Fountain Solution Circuits 29 00 01
|
| - | solves every foaming problem in the dampening circuit with a minimum dosage
| | - | can be used for all fountain solution additives |
|
Carton with 12 bottles of 1 l
|
|
System Stabilizer 29 00 08
|
| - | technical stabilizer for aqueous systems in storage tanks
| | - | due to its specific action only a short-time use is necessary |
|
Carton with 12 bottles of 1 kg
Cans of 10 and 25 kg
|
|
System Stabilizer 29 00 09
|
| - | technical stabilizer for aqueous systems in storage tanks
| | - | broad spectrum of activity |
|
Carton with 12 bottles of 1 kg
Cans of 10 kg and 25 kg
|
|
Aquadot® Hardening Agent 25 00 10
|
| - | is used for adjusting water from RO units to an optimal quality for printing |
|
Cans of 25 kg
Drums of 130 and 220 kg
Containers of 600 and 1000 kg
|
|
For Dispersion Coatings
|
|
|
|
|
Wetting Agent VP 1064
|
| - | for improving the wetting behaviour of dispersion coatings and dispersion print coats
| | - | reduces surface tension
| | - | improves feathering
| | - | higher gloss and higher slip
|
Dosage: max. 4%
|
Carton with 12 bottles of 1 l
Cans of 10 l and 25 l
|
|
Defoamer for Dispersion Coatings 19 00 02
|
| - | counteracts the foaming of dispersion coatings, particularly after dilution with water
| | - | can be used for all dispersion coatings
|
Dosage: 0.5 to max 1.0%
|
Carton with 12 bottles of 1 l
|
|
Crosslinker VP 150
|
| - | improves repelling and resistance of dispersion coatings against water, alcohol, fat and oil
| | - | improves rub resistance, block resistance and temperature stability of the dispersion coating |
|
Carton with 12 bottles of 1 kg
|
|
Retarder 19 00 23 for Dispersion Coatings
|
| - | during longer machine stops, the product is sprayed onto rollers, plates and blankets in order to avoid drying of the coating film |
|
Carton with 12 bottles of 1 l
Cans of 10 l and 25 l
|
|
Cleanser for Dispersion Coatings 19 00 13
|
| - | suitable for photopolymere plates (CYREL)
| | - | tested by DU PONT
| | - | cleans quickly and thoroughly all types of photopolymere plates, blankets and rollers
| | - | miscible with water and alcohol |
|
Carton with 12 bottles of 1 l
Cans of 10 l and 25 l
Drums of 210 l
|
|
For UV Coatings
|
|
|
|
|
Additive VP 1046 for UV Coatings
|
| - | for improving slip, wetting behaviour and scotch tape resistance of UV coatings
| | - | reduces surface tension
| | - | improves wetting, even on critical substrates
| | - | higher gloss
| | - | improves rub resistance
| | - | optimised scratch resistance
|
Dosage: 1 - 5 %
|
Carton with 12 bottles of 1 kg
Cans of 10 kg and 25 kg
|
|
Effect Additive VP 10010
|
| - | By adding Effect Additive VP 10010 to a special ink you can achieve a "wrinkle effect" ("leatherlike effect") when applied inline with UV Coating VP 1038 . |
|
PE bottles of 1 l
|
|
For Printing Inks
|
|
|
|
|
COLOR STABIL Offset Printing Ink Additive
|
| - | highly effective printing ink additive as a remedy for ink accumulation, dry running, streaking, especially in cases of low ink acceptance
| | - | no impact on drying, gloss and rub resistance
| | - | also suitable for processing of metallic inks
|
Dosage: 5% to max. 10%
|
Carton with 12 bottles of 950 g
|
|
COLOR THIX Printing Ink Gel
|
| - | for adjusting consistency of printing inks
| | - | problem free mixing, no loss of contrast, improved processing
| | - | no delay in drying, no negative impact on gloss
| | - | prevents picking, coagulating and muddy area print
| | - | improves flatness of paper
|
Dosage: 3 - 10%
|
Carton with 12 Cans of 435 g
|
|
ÖKO-FARB-FRISCH (Ink Fresh) - Anti-drying Spray for Printing Inks
|
| - | prevents drying of inks in cans, in the ink duct and on inking rollers
| | - | does not affect rollers and plates
| | - | in sufficient dosage prevents drying of inks even during longer intervals |
|
Carton with 10 aerosol cans of 300 ml
FARB FRISCH Pump Spray:
Carton with 18 bottles of 450 ml
FARB FRISCH 24 20 45:
Cans of 10 and 25 ltr
|
|
ÖKO-FARB-START (Ink Start) - Start-up Spray
|
| - | prevents sticking and picking of sheets or web to blankets
| | - | mineral oil evaporating from the ink during stoppages is replenished, the ink is freshened up
| | - | reduces spoilage at start up, no register distortion |
|
Carton with 10 aerosol cans of 300 ml
FARB START Pump Spray:
Carton with 18 bottles of 450 ml
FARB START 24 20 35:
Cans of 10 and 25 ltr
|
|
GRAF-O-SICC Oxygen Active Drying Agent
|
| - | for rapid and secure drying combined with good rub resistance
| | - | compensates for emulsified fountain solution
| | - | improves rub resistance
| | - | allows quick subsequent processing, also in printing foils and covered cartons, e.g. Chromolux-Metallic, matt papers |
|
Carton with 12 bottles of 650 g
Open top drums with 40 kg
|
|
For Printing Plates
|
|
|
|
|
Plate Cleaner 2520 (E 654)
|
| - | complies with the new regulations issued by the Berufsgenossenschaft ETEM (German Accident Prevention & Insurance Association)
| | - | no hazardous product according to the transport regulations
| | - | free of aromatic hydrocarbons
| | - | suitable for cleaning of offset printing plates, especially also for CTP plates
| | - | residues of printing inks are removed fast and thoroughly
| | - | also very well suitable for pore deep cleaning of film dampening rollers
| | - | does not contain abrasive components
| | - | guarantees maximum output of printing plates |
|
Carton with 12 bottles of 800 ml
Cans of 10 and 25 ltr
|
|
EXTINCTO 2050 - Correcting Agent for Offset Plates
|
| - | all photopolymer layers of positive and negative plates can be corrected
| | - | can also be used for the majority of presensitized plates |
|
Glass bottle of 10 ml
|
|
Gumming Solution Neutral 2091
|
| - | for machine and hand gumming of printing plates |
|
Carton with 12 bottles of 1 kg
Cans of 10 kg and 25 kg
|
|
For Rubber Blankets
|
|
|
|
|
GLISS Concentrate 24 10 05
|
| - | for improved paper travel, especially at start-up after longer machine stops
| | - | to ensure smoother gliding and turning in sheet fed, web offset, newspaper printing and in converting machines
| | - | does not attack rollers or blankets |
|
Cans of 10 l and 25 l
also available in:
Hand spray cans with 450 ml active substance
or
Aerosol spray cans
|
|
Rubber Regenerating Agent 22 91 01
|
| - | complies with the future regulations issued by the Berufsgenossenschaft ETEM (German Accident Prevention & Insurance Association)
| | - | free of aromatic hydrocarbons
| | - | for ink rollers and rubber blankets
| | - | paint remover for ink particles |
|
Carton with 12 bottles of 1 ltr
Cans of 10 and 25 ltr
Drums of 130 and 210 ltr
|
|
Rubberlift 2210 Repair Fluid for rubber blankets
|
| - | swelling agent for removing minor damages (indentations) on the rubber blanket surface
| | - | suitable for all kinds of rubber blankets |
|
Metal bottles of 125 ml
|
|
Spray Powder
|
|
|
|
|
VEGRASIL Spray Powder F 10, M 21 and G 46
|
Spray powder
with BG ETEM Quality Seal for M 21 and G 46
based on natural materials, biodegradable
G 46 is made without genetic engineering; for F 10 and M 21 we cannot guarantee that they are made without genetic engineering
| - | Suitable for use in all known spray units
| | - | Minimum dosage, especially for jobs with inline print finishing
| | - | Excellent flow properties and pourability
| | - | Perfect distribution of grain sizes
| | - | No clumping
| | - | No sand paper effect
| | - | Environmentally friendly and not harmful to health
|
Average granulation:
VEGRASIL F 10
VEGRASIL M 21
VEGRASIL G 46
|
Carton with
12 PE bottles
of 0.7 kg (for F 10 and M 21) and
of 0.8 kg (for G 46)
PE cans:
VEGRASIL F 10 and M 21: with 7 kg
VEGRASIL G 46: with 8 kg
|
|
|
|
|
|
|
ÖKO GLISS Silicone Spray
|
| - | to ensure smoother gliding and turning
| | - | simply spray on; if necessary, polish with a cloth
| | - | does not attack rollers nor blankets |
|
Carton with 10 aerosol cans of 300 ml
GLISS Silicone Pump Spray:
Carton with 18 bottles of 450 ml
GLISS Silicone 24 10 05:
Cans of 10 and 25 ltr
|
|
ÖKO ANTISTATIC Spray
|
| - | prevents electrostatic charge absolutely safely and for a long time
| | - | no smearing and ghosting on films or foils
| | - | treated surfaces can be printed without problems |
|
Carton with 10 aerosol cans of 300 ml
ANTISTATIC Pump Spray:
Carton with 18 bottles of 450 ml
ANTISTATIC Fluid 24 21 05:
Cans of 10 and 25 ltr
|
|
ÖKO FARB FRISCH (Ink Fresh) - Anti-drying Spray for Printing Inks
|
| - | prevents drying of inks in cans, in the ink duct and on inking rollers
| | - | does not affect rollers and plates
| | - | in sufficient dosage prevents drying of inks even during longer intervals |
|
Carton with 10 aerosol cans of 300 ml
FARB FRISCH Pump Spray:
Carton with 18 bottles of 450 ml
FARB FRISCH 24 20 45:
Cans of 10 and 25 ltr
|
|
ÖKO FARB START (Ink Start) - Start-up Spray
|
| - | prevents sticking and picking of sheets or web to blankets
| | - | mineral oil evaporating from the ink during stoppages is replenished, the ink is freshened up
| | - | reduces spoilage at start up, no register distortion |
|
Carton with 10 aerosol cans of 300 ml
FARB START Pump Spray:
Carton with 18 bottles of 450 ml
FARB START 24 20 35:
Cans of 10 and 25 ltr
|
|
Roller Oil E 579 Öko-Spray
|
| - | prevents dry running of rollers when a reduced format is used
| | - | prevents the set-off of printing inks on metal surfaces, e.g. on metering rollers
| | - | spray can also be used during operation of the press
|
|
Eco Roller Oil Spray:
Carton with 10 aerosol cans of 300 ml
Roller Oil Pump Spray:
Carton with 18 bottles of 450 ml
Roller Oil E 579:
Cans with 10 and 25 ltr
|
|
Cylinder Preservation Concentrate VP 130 Plus
|
| - | Provides safe protection of plate, blanket and impression cylinders, plate/blanket clamping systems as well as of metallic or ceramic surfaces.
| | - | Protects even areas difficult to access by vapour space preservation.
| | - | approval by manroland |
|
Eco Spray: Carton with 10 aerosol cans of 300 ml active substance (with compressed air as filling gas)
Pump Spray: Carton with 18 bottles of 450 ml
PE Cans with 10 or 25 ltr
further packing sizes on request
|
|
Cylinder Preservation Concentrate VP 130
|
| - | protects plate, blanket and back pressure cylinders as well as roller bodies from corrosion
| | - | recommended by MAN, KOENIG & BAUER and WIFAG
| | - | low viscosity |
|
Eco Spray: Carton with 10 aerosol cans of 300 ml active substance (with compressed air as filling gas)
Pump Spray: Carton with 18 bottles of 450 ml
PE Cans with 10 or 25 ltr
further packing sizes on request
|
|
Silicone Slip Emulsion, Antistatic Concentrate, Rewetting Concentrate
|
|
|
|
|
Silicone Slip Emulsion NOVOSIL 2008-60
|
| - | with additional antistatic equipment and additives for paper web rewetting
| | - | with adjusted dilution of the concentrate results a rewetting of the paper web up to 5% absolute humidity.
| | - | Dilution with water: 1:30 to 1:40 |
|
Cans of 25 kg
Drums of 220 kg
Containers of 600 kg and 1000 kg
|
|
Silicone Slip Emulsion NOVOSIL 2008-40
|
| - | with additional antistatic equipment and additives for paper web rewetting
| | - | with adjusted dilution of the concentrate results a rewetting of the paper web up to 5% absolute humidity.
| | - | Dilution with water: 1:10 to 1:20 |
|
Cans of 25 kg
Drums of 220 kg
Containers of 600 kg and 1000 kg
|
|
Silicone Slip Emulsion NOVOSIL 2008-30
|
| - | with additional antistatic equipment and additives for paper web rewetting
| | - | with adjusted dilution of the concentrate results a rewetting of the paper web up to 5% absolute humidity.
| | - | Dilution with water: 1:10 to 1:20 |
|
Cans of 25 kg
Drums of 220 kg
Containers of 600 kg and 1000 kg
|
|
Silicone Slip Emulsion NOVOSIL R E 512
|
| - | anti static slip emulsion for use with silicone application units in web offset and gravure printing;
| | - | improves the handling characteristics in the folder and in the bindery
| | - | contains an additional additive in order to improve the rewetting of the paper web in one operation
| | - | dilution with water: 1 : 10 to 1 : 20 |
|
Cans of 25 kg
Drums of 220 kg
Containers of 600 kg and 1000 kg
|
|
Antistatic Concentrate 24 21 13
|
| - | for preventing electro static charge on paper web in process, especially in web offset and rotogravure units
| | - | dosage in the silicone unit: 1.5 - 2% in premixed silicone |
|
Carton with 12 bottles of 950 g
Cans of 25 kg
Drums of 120 kg
|
|
Rewetting Concentrate 2600
|
| - | for web rewetting
| | - | free of formaldehyde and formaldehyde depot substances |
|
Carton with 12 bottles of 1 kg
Cans of 10 kg and 25 kg
Drums of 220 kg
Containers of 600 kg
|
|
|
