|
|
|
|
COLOR STABIL Offset Printing Ink Additive
|
| - | highly effective printing ink additive as a remedy for ink accumulation, dry running, streaking, especially in cases of low ink acceptance
| | - | no impact on drying, gloss and rub resistance
| | - | also suitable for processing of metallic inks
|
Dosage: 5% to max. 10%
|
Carton with 12 bottles of 950 g
|
|
COLOR THIX Printing Ink Gel
|
| - | for adjusting consistency of printing inks
| | - | problem free mixing, no loss of contrast, improved processing
| | - | no delay in drying, no negative impact on gloss
| | - | prevents picking, coagulating and muddy area print
| | - | improves flatness of paper
|
Dosage: 3 - 10%
|
Carton with 12 Cans of 435 g
|
|
ÖKO-FARB-FRISCH (Ink Fresh) - Anti-drying Spray for Printing Inks
|
| - | prevents drying of inks in cans, in the ink duct and on inking rollers
| | - | does not affect rollers and plates
| | - | in sufficient dosage prevents drying of inks even during longer intervals |
|
ÖKO FARB FRISCH Spray:
Carton with 10 aerosol cans of 300 ml
FARB FRISCH Pump Spray:
Carton with 18 bottles of 450 ml
FARB FRISCH 24 20 45:
Cans of 10 and 25 ltr
|
|
ÖKO-FARB-START (Ink Start) - Start-up Spray
|
| - | prevents sticking and picking of sheets or web to blankets
| | - | mineral oil evaporating from the ink during stoppages is replenished, the ink is freshened up
| | - | reduces spoilage at start up, no register distortion |
|
ÖKO FARB START Spray:
Carton with 10 aerosol cans of 300 ml
FARB START Pump Spray:
Carton with 18 bottles of 450 ml
FARB START 24 20 35:
Cans of 10 and 25 ltr
|
|
GRAF-O-SICC Oxygen Active Drying Agent
|
| - | for rapid and secure drying combined with good rub resistance
| | - | compensates for emulsified fountain solution
| | - | improves rub resistance
| | - | allows quick subsequent processing, also in printing foils and covered cartons, e.g. Chromolux-Metallic, matt papers |
|
Carton with 12 bottles of 650 g
Open top drums with 40 kg
|
Printing Ink Additives
